Company: Forge Motorsport

Hyundai i30N Mk3 PFL/Veloster N Turbo Inlet Adaptor

Product code: FMTIA2
£151.39 Inc. VAT £126.16 Exc. VAT (VAT will be added during the checkout process) Estimate Delivery

Please select options and qty below:

Check your vehicle compatibility

Addons:

More info Induction Kit for Hyundai i30N, Kona N, and Veloster N - Read More

Have A Question? Read Instructions?

Prefer to talk over the phone? Call us +44 1452 380999

Description

Product Description

THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3 I30N

With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the i30N and Veloster N. 

Designed and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves!

Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.

           

Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity.

Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing.

The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.

As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor.

Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM.

This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions.

  • Manufactured from 6082 aerospace grade aluminium
  • Black anodised for ultimate protection and durability
  • Increased capacity of over 150%
  • No engine check lights (EML)
  • Perfect fit with our induction kit
  • Increased air flow
  • Hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
  • Made in the UK
  • Lifetime warranty


 

Check your vehicle compatibility: Click here

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

from on Mar 17th 2024 Verified Purchase
from on Mar 7th 2024 Verified Purchase
Got this with induction kit, great quality product and as always fast delivery.
from on Aug 24th 2023 Verified Purchase
Great Product and amazing quality, big shout out to Paul for sorting me out.
from on Aug 16th 2023 Verified Purchase
Increases airflow to the turbo and has a large noticeable increase in throttle response too
from on Jul 23rd 2023 Verified Purchase
Brilliant product and fast delivery.
from on Jul 23rd 2023 Verified Purchase
Fast delivery and quality part.
from on Jul 18th 2023 Verified Purchase
An absolute must-have when buying the FMINDK28 induction kit. Looks the part and is a major step up over the factory part. Just expect to spend a while trying to get the rear bolt out/in!
from on Jul 12th 2023 Verified Purchase
Quality piece of kit, quick delivery and crystal clear instructions to follow on how to fit. Paired up with the matching induction kit and it sounds unreal! Easily recommend to anyone!
from on Jun 7th 2023 Verified Purchase
from on May 24th 2022 Verified Purchase
As ALWAYS this is another quality item from Forge! The shear quality of the hose compared with the ones on the car is in a different league and the diameter of it is unreal, its worlds apart! Combined with the induction kit it's a 10 bhp upgrade, it really is a must have part to fit if your chasing bhp.
from on Sep 24th 2019 Verified Purchase
Perfect communication with store. Fast delivery maximum satisfied.

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Click the triangles to find your car make and model. Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well.

If you need further assistance, please call us on +44 1452 380999 or email us.

Hyundai

Instructions

Hyundai i30N Mk3 PFL/Veloster N Turbo Inlet Adaptor

Warranty

Warranty Infomation

The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.

Shipping

Shipping

UK Mainland

Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details

Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary). 

Europe and Worldwide

Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.

Shipping into the EU - Duty Charge Information

All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU. 

If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here


Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.

Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.

FAQ's and other info can be found here.

Expert Answers

Submit Question Cancel
Submitted questions may be published on the website.

Will this turbo inlet adapter fit my kona N?

No, we offer the part FMTIA10 for the Kona N as it has a different turbo coupling specification to the one sold under the part number you have referenced (FMTIA2).

Hi, I presume this turbo inlet adaptor will fit nicely together with the induction kit, would the car need a tune after fitting them both or is it literally just a bolt on job and ready to run? Thanks

Hello

Yes this product works with our FMINDK28 and both products can be installed to standard vehicles with no issues at all. You fulfill their full potential with a ECU software upgrade however.

Hi Will the turbo inlet adaptor fit a 2021 model my 3.5 i30 n dct. Thanks

Hello , the product you need is FMTIA10 for the MK3.5.