THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX
With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the i30N and Veloster N.
Designed and developed by our highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N and Veloster's intake system being the restrictive aluminium inlet pipe, we found something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves!
Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.
Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing.
Interestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. During this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C.
The Forge developed turbo inlet adaptor improves your i30N or Veloster's airflow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes due to more air being kept within the intake system.
The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.
As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor.
Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM.
This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions.
- Manufactured from 6082 aerospace grade aluminium
- Black anodised for ultimate protection and durability
- Increased capacity of over 150%
- No engine check lights (EML)
- Perfect fit with our induction kit
- Increased air flow
- The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader
- Made in the UK
- Lifetime warranty
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Perfect communication with store. Fast delivery maximum satisfied.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the Supplier, failure to follow the Supplier’s instructions, or any alteration or repair carried out without the Supplier’s approval.
Next day delivery applies to orders processed before 2pm Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Full details
DELIVERY IS FREE OF CHARGE FOR ALL ORDERS £20 OR OVER
Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man).
Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, Isle of Man, and Cumbria.
Delivery service charge will vary from £15.00 to £26.00. Small sized and low value products are sent by Royal Mail and can take up to 7 working days in transit. All other products are sent by standard UPS/DHL service and can take up to 5 days in transit, but we expect the majority of orders to be delivered within 2 days of dispatch.
Delivery service charges will vary from £10.00 + VAT (20%) to £95.00 + VAT depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process.
Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £10.00 GBP + VAT. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide. This delivery service adjustment will typically be made for low value product below £20.00 GBP + VAT and where the ordered product is small enough to fit in the above-mentioned parcel size.
The Royal Mail recorded service into Europe can take up to 10 working days in transit and tracking number details can be requested via the firstname.lastname@example.org general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by DHL or UPS standard service taking up to 5 working days in transit.
Delivery service charges will vary from £12.00 to £250.00 GBP depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process. Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £12.00 GBP. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide.
This delivery service adjustment will typically be made for low value product below £20.00 GBP and where ordered product is small enough to fit in the above-mentioned parcel size. The Royal Mail recorded service into Europe can take up to 15 working days in transit and tracking number details can be requested via the email@example.com general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search engine found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by DHL/UPS standard service taking up to 5 working days in transit.
Whilst shipping outside of the UK may seem expensive, it ensures safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the firstname.lastname@example.org email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Atmospheric and Recirculating Valve for Hyundai i30N, and Veloster N
Manufacturer: Forge Motorsport
Hyundai i30N/Veloster N Dual Catch Can and Expansion Tank
Manufacturer: Forge Motorsport
356mm Front Brake Kit for the Hyundai I30N/ Veloster N
Manufacturer: Forge Motorsport