This Forge intake kit is for the VW Up 1.0 TSI and GTI
This intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and for a hard wearing finish. This has a dual purpose of protecting the filter from heat soak,
With the engine bay on the VW Up being so compact, the development team were hugely restricted in finding a suitable location for an aftermarket induction kit. After lots of testing and different locations explored, we felt this induction kit is most suited to the VW Up, both for performance and aesthetics.
With gains of 5bhp and 6lb/ft torque throughout the rev range, we are extremely pleased with the performance results; not to mention the different sound our intake gives this punchy little 1.0 litre engine. Higher gains can of course be expected mapped vehicles.
The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of 3 colours: black, red, or blue. Please select colour from the drop-down list above.
- The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically
- Lifetime warranty*
The filter is manufactured to Forge’s specifications by Pipercross
- Washable and reusable design.
- Layered multi-density foam technology.
- Designed and manufactured in Great Britain.
- Improvement in engine power and torque with superior engine protection from dirt and dust ingress.
- Designed to flow stronger for longer.
Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The Gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge Motorsport product.
Fitting is straightforward and can be completed in 20-30 minutes.
This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock.
DO NOT OVER TIGHTEN
When fitting the filter to its counterpart please ensure you do not over tighten the hose clamp connecting them. Doing so could result in the part being crushed, leading to fitment and/or performance issues. The recommended torque setting for this hose clamp is 2-2.4Nm
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Lovely bit of kit. Was a little caught out by needed a file/bolt cutters for the screw under the scuttle but apart from that fitting was very straight forward. I'll be getting the dump valve next for sure.
Awesome induction kit and really well manufactured!
Fitting takes a few minutes once familiar with instructions, everything fitted together nicely and well made, little bit more induction noise but nothing excessive unless properly laying down the right foot. Works great in tandem with the dump valve hose too, I'm using the old dump valve version with the small dump valve and need to think about getting it changed for the updated newer version.
VW Up 1.0 GTI/TSI Induction Kit
The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Next day delivery applies to orders processed before 2pm Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Full details
Delivery is free of charge for all orders £20 or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary).
Europe and Worldwide
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.
Shipping into the EU - Duty Charge Information
All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU.
If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the email@example.com email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
Alfa Romeo, Fiat, Ford Ka, and Lancia Wheel Spacers
Manufacturer: Forge Motorsport
£35.08 £42.10 £20.59 £24.71
5mm Audi, VW, SEAT, and Skoda Alloy Wheel Spacers
Manufacturer: Forge Motorsport
£36.14 £43.37 £24.10 £28.92
Intercooler for BMW F20, F21, F22, F23, F30, F31, F36, F87 Chassis
Manufacturer: Forge Motorsport
£603.36 £724.03 £487.76 £585.31