Company: Forge Motorsport

1.5 TSI EVO Intake - VW, Audi, Seat, and Skoda

Product code: FMINDK35
£432.60 Inc. VAT £360.50 Exc. VAT (VAT will be added during the checkout process) Estimate Delivery

Please select options and qty below:

Check your vehicle compatibility

Addons:

More info Product fitment will take approximately 1.5 hours at our Gloucester, UK HQ by one of our highly skilled technicians. We will be in contact after you place your order to arrange a convenient date and time for fitting. - Read More
More info Blow Off Valve for VW, Audi, Seat & Skoda 1.5 TSI - Read More

Have A Question? Read Instructions?

Prefer to talk over the phone? Call us +44 1452 380999

Description

Product Description

Forge are proud to present the high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. (You can find a replacement filter here).

The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine.

Left hand drive intake

Right hand drive intake

As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system.

The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing.

 

 

All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering.

During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK35 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.

  • The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
  • This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
  • The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
  • The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
  • Lifetime warranty*

 

*Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles*

 

Check your vehicle compatibility: Click here

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Product Reviews

Product Reviews

from on Sep 4th 2023 Verified Purchase
Great quality
from on Sep 4th 2023 Verified Purchase
Excellent
from on Sep 4th 2023 Verified Purchase
Great product, would highly recommend
from on Sep 4th 2023 Verified Purchase

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Click the triangles to find your car make and model. Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well.

If you need further assistance, please call us on +44 1452 380999 or email us.

Audi
Cupra
Seat
Skoda
Volkswagen

Instructions

Warranty

Warranty Infomation

The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.

Shipping

Shipping

UK Mainland

Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details

Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary). 

Europe and Worldwide

Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.

Shipping into the EU - Duty Charge Information

All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU. 

If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here


Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.

Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.

FAQ's and other info can be found here.

Expert Answers

Submit Question Cancel
Submitted questions may be published on the website.

It's compatible with the Skoda Fabia 1.5 TSI EVO DXD Engine?

yes this is compatible 

Buongiorno Il prodotto è ok per una Seat Leon 3° serie 1.5 TSI EVO ACT 130 cv del 2019?

hello , yes this will but please select the appropriate side of vehicle on the drop down menu. 

I have a 2022 Tiguan 1.5 tsi. Is this compatible? Thanks

Hello

Yes this product is compatible with your vehicle.

does it matter which Drive side i order? what are the differences between those 2 (Right hand drive and Left hand drive)?

The LHD kit does fit the RHD models, but its not an ideal fit. Otherwise the RHD kit definitely does not ft the LHD models. From our perspective we prefer customers select the appropriate kit advertised for their model.

Does it also fit on a 1.5 etsi? Specifically a Mk8 1.5etsi.

Yes.

Why are there 2 bungs can only see on the instructions the fitting of one of them not two?

Some 1.5 TSI engines do not have breather return ports at all, both requiring a blank in these models.

Does this fit on the American models of the 1.5 tsi? I have a 2022 Jetta 1.5 tsi

hello , we have found some off the American model varients may have a differant breather set up , we are currently looking into a workable solution.

È compatibile con seat leon mk3 1.5 tsi 130cv?

hello , yes this is compatible 

Hi there. Would this fit a mk8 golf 1.5tsi DPBA engine? Many thanks.

Hello

Yes this product is compatible with your vehicle.

I have a 1.5tsi troc 2018 will these fit ?

Hello

Yes this product is compatible with your vehicle.

Hi will this fit my 2023 vw caddy 1.5tsi?

Hello 

Could you please send me a picture of your engine bay to confirm fitment please.

Hi, will this fit a 2023 Seat Leon Fr 1.5tsi Mk4? The engine looks the same but my steering wheel is on the left side, I just wanted to check if it works for my car.

Hello

Yes this products is compatible with right and left hand drive vehicles. The only aspect to check is wether your vehicle is equipped with a MAF sensor, most are not and this is fine but some countries they have this sensor and its not compatible.

Please read the website description to check.

Hi there. Iv got a 2022 skoda octavia 1.5tsi evo engine. 150hp. Will this fit my car as the engine pictures look the same as mine ???

Hello 

Yes this product is compatible with your vehicle, also FMDV39 which is our new dump valve is compatible too.

Hi there how big is the outlet on your turbo adapter is it 2inch or 3inch? Thanks Ethan

hello , where the hose meets the turbo inlet adaptor it is 2" 

Hey, will this fit a 2021 Mk4 Seat Leon Fr 1.5tsi? Engine looks the same just would like to double check, thanks.

Hello

Yes FMINDK35 is compatible with your vehicle.

che differenza c'è tra FMINDK35 LHD e senza lhd

The silicon hose is diffrent LHD to RHD 

La manguera de silicona es diferente LHD a RHD