Company: Forge Motorsport

Intercooler for Peugeot 308 GTI Mk2 (2015-2020)

Product code: FMINT30
£503.99 Inc. VAT £419.99 Exc. VAT (VAT will be added during the checkout process) Estimate Delivery

Please select options and qty below:

Check your vehicle compatibility

Addons:

More info Peugeot 308 GTI Atmospheric Dump Valve - Read More

Have A Question? Read Instructions?

Prefer to talk over the phone? Call us +44 1452 380999

Description

Product Description

This part replaces OEM part P9813218680 - EP6 Engine

Forge Motorsport are proud to present a complete plug and play intercooler solution for the Peugeot 308 GTI. With reports of the IATS (inlet air temps) reaching dangerous levels on track days in the summer months resulting in the engines ECU pulling out timing to prevent detonation. This can cause damage to your vehicles engine thus resulting in a loss of power in the highly tuned 1.6 litre turbo charged power plant.

The vehicle used to develop the product kindly loaned to us by Godspeed Brakes has been frequently used on track and tested to its limits, without any modifications to the vehicle’s bodywork. The Forge Motorsport development team have managed to increase the volume of air passed through the air-to-air intercooler by the turbo charger to over 74% with a frontal area increase of 8% over the factory OEM supplied intercooler.

FMINT30 is finished in our anti-corrosion powder coating which not only helps preserve this intercooler from harsh environments but also aids its thermal properties. Alternatively it is available in our raw alloy motorsport finish and as with all Forge Motorsport fabricated products this intercooler if backed by the legendary Forge Lifetime Warranty.

With no extra lag and a proven reduction in IATS this is a must have item for the Peugeot 308 GTI owner who is either using their car for fast road, track days, or competition use. Alternatively, if you intend to modify your 308 GTI with either software (a performance Remap or engine ECU re calibration) the Forge Motorsport intercooler will aid to give the extra cooling and performance needed to ensure the engine stays reliable, safer, and runs cooler in the hot summer months.

With data logging, we found at 6646RPM the IATS did not pass 24°C. This was tested on the third pull on the dyno compared with 40°C on the second pull at 6647RPM with the stock cooler in place. Whilst power increased by 7 BHP at the wheel between 4500RPM and 6200RPM, with a 12NM of torque gain at 5200RPM and a consistent gain between 4300RPM and 6000RPM.

This Intercooler kit is a complete bolt on package and in turn means it is also fully reversible if required, it is also supplied with a full set of comprehensive instructions.

Complimentary Products

Our uprated Forge dump valve for the Peugeot 308 GTI has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Peugeot 308 GTI, this is a fully atmospheric blow off valve, so you can enjoy that fantastic “pshh” sound! This part replaces OEM part number 9808798580

A set of 4 ultra-high performance brake lines. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit.These lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level.

 

Check your vehicle compatibility: Click here

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Dyno Results

With data logging, we found at 6646RPM the IATS did not pass 24°C. This was tested on the third pull on the dyno compared with 40°C on the second pull at 6647RPM with the stock cooler in place. Whilst power increased by 7 BHP at the wheel between 4500RPM and 6200RPM, with a 12NM of torque gain at 5200RPM and a consistent gain between 4300RPM and 6000RPM.

Product Reviews

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Click the triangles to find your car make and model. Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well.

If you need further assistance, please call us on +44 1452 380999 or email us.

Peugeot

Instructions

Intercooler for Peugeot 308 GTI Mk2 (2015-2020)

Warranty

Warranty Infomation

The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.

Shipping

Shipping

UK Mainland

Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details

Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary). 

Europe and Worldwide

Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.

Shipping into the EU - Duty Charge Information

All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU. 

If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here


Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.

Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.

FAQ's and other info can be found here.

Expert Answers

Submit Question Cancel
Submitted questions may be published on the website.

Hello, What diameter of pipes should i get to match this intercooler ? Thank you, Gautier

Hello

65/66mm ID hoses will be fine with this product.