Manufacturer: Forge Motorsport

BMW M3/M4 Chargecooler

Product code: FMCC1

£1798.80Inc VAT
£1499.00Exc VAT
(VAT will be added during the checkout process)

Please select product options and quantities below:

Qty:


Product Description

In addition to the Forge Motorsport PolarCooler range, here we have the top mount replacement chargecooler and expansion tank for the BMW MSport S55 Engine.

The Chargecooler features an all aluminium construction which overcomes all the issues relating to plastic end tank splitting, failure at high boost and leaks between the core and end tanks with end tank seal failure. The end tanks are fabricated using high precision laser cut sheet metal panels which are TIG welded by hand for maximum strength and durability.

Designed and manufactured at Forge Motorsport HQ in Gloucestershire, England, we utilised our Solidworks CAD design system to assist in the creation, modification, CFD (Computational Fluid Dynamics) analysis and optimization of this innovative charge cooler. Three different core constructions were evaluated during the development process. The final design of a bar and plate core far outperformed the other two alternatives. In doing this, the Forge Motorsport development engineers have made a quadruple pass design, allowing the water to flow through four passes of the cooler which improves the cooling efficiency beyond any other products currently on the market.

Unique to the market, the Forge BMW M3/M4 S55 Chargecooler system uses an expansion tank rather than a header tank like the OEM system. There is a filler cap located at the highest point on the Chargecooler allowing you to be sure that the charge is 100% full of coolant with no air pockets. This maximises the efficiency of the heat rejection of the coolant within the Chargecooler water jacket.

  • Offering over 71% increase in volume and over 42% increase of frontal area.
  • In hot climate testing, constant dyno runs showed significantly lower inlet temperatures compared with the stock system and an increase in power of up to 20BHP.
  • As part of Forge Motorsport’s strict quality control process, each chargecooler unit is carefully inspected and pressure tested to 4BAR before despatch.
  • Located on the outlet tank of the chargecooler there is also a 1/8 NPT port ready for water/methanol injection if required.

The existing OEM Chargecooler rubber mounts are used for this expansion tank and Chargecooler, isolating the system from the harsh vibrations of the engine. No trimming or cutting of the vehicle is required and all parts can be returned to standard if necessary.

 

In the box

1x Chargecooler unit
1x Expansion tank with sight glass
1x Expansion tank cap
1x Small radiator cap
1x Billet radiator cap cover
1x Billet blanking cap
1x 1/8 NPT Grub screw
7x M6x12mm  Allen cap bolts
7x 6mm washers
1x M8x20mm Allen cap bolt
1x 8mm washer
1x M8 Nyloc nut
3x 8-16mm Hose clamps
1 x 8mm ID Vacuum hose x 170mm
1x 8mm ID Vacuum hose x 750mm 

Click here to find out about information and care for your
Forge Motorsport cooling product.

Click here to find out about information and care for your
Forge Motorsport cooling product.

Please Note: In line with our policy to constantly review, revise and improve our product range, the product you receive may differ from the one advertised.

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Shipping

UK Mainland

DELIVERY IS FREE OF CHARGE
Small sized and low value product is sent by Royal Mail and can take up to 4 working days in transit. All other products are sent by standard UPS service which is usually a next day service, but can take 2 days in transit.
(Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man).

Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, Isle of Man, and Cumbria.
Delivery service charge will vary from £15.00 to £26.00. Small sized and low value products are sent by Royal Mail and can take up to 7 working days in transit. All other products are sent by standard UPS service and can take up to 5 days in transit, but we expect the majority of orders to be delivered within 2 days of dispatch.

Europe

Delivery service charges will vary from £10.00 + VAT (20%) to £95.00 + VAT depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process.
Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £10.00 GBP + VAT. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide. This delivery service adjustment will typically be made for low value product below £20.00 GBP + VAT and where the ordered product is small enough to fit in the above-mentioned parcel size.
The Royal Mail recorded service into Europe can take up to 10 working days in transit and tracking number details can be requested via the despatch@forgemotorsport.co.uk general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by UPS standard service taking up to 5 working days in transit.
 

Worldwide

Delivery service charges will vary from £12.00 to £250.00 GBP depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process. Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £12.00 GBP. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide.
This delivery service adjustment will typically be made for low value product below £20.00 GBP and where ordered product is small enough to fit in the above-mentioned parcel size. The Royal Mail recorded service into Europe can take up to 15 working days in transit and tracking number details can be requested via the despatch@forgemotorsport.co.uk general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search engine found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by UPS standard service taking up to 5 working days in transit.

Whilst shipping outside of the UK may seem expensive, it ensures safe and timely delivery of your new Forge Motorsport products. For further information on cost and delivery times, please contact Forge Motorsport using the info@forgemotorsport.co.uk email address if you require any more information.

Warranty Infomation

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Tags

BMW

Associated Products: