Company: Forge Motorsport

Uprated Intercooler for the EA888 2.0 TSI engine

Product code: FMMK7FMIC
This item has been discontinued

Please select options and qty below:

Check your vehicle compatibility

Addons:

More info The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines, eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. - Read More

Audi S3 and TTS

Have A Question? Read Instructions?

Description

Product Description

*This product has now been superseded by FMINT32*



This is our intercooler for the Volkswagen Mk7 Golf, Mk7R, Tiguan, Audi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.

  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation

Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below. 

*gains will vary per car model and conditions

The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C.

All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it's based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.

So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains. 

The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product!

*Please note - This will not fit Audi S3 facelift 2017 onwards - Some modification to Audi S3 and TTS may be necessary*

⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­

⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐

⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­

Check out all the reviews here

Complimentary Products

To perfectly compliment this intercooler, we have a range of other performance and aesthetically enhancing products. One of our most popular products is the carbon fibre intake. It offers greater sound from the engine, particularly when on boost, and our product testers have reported a more responsive throttle too. The filter element itself is provided by Pipercross, and is fully serviceable or replaceable if necessary. In our testing, it was the only filter type that was able to offer adequate filtration to the engine, whilst still being capable of flowing enough air to offer an increase in horsepower and torque.

One of the easiest upgrades you can make to your vehicle is the utilisation of the Forge panel filter. The filter is made using a high-quality, high-flow, synthetic nanofiber filtration media which is then pleated to maximise the effective surface area which in turn increases air flow. This was tested up against many other medias to where we found the synthetic nanofiber filtration media outperformed all others. 

 

Another brilliantly simple and cost effective upgrade for this application is our turbo blanket. Designed by the Forge development team on the Forge VW Golf MK1 race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components.

Another performance enhancing and cost effective upgrade is our high flow inlet hose. The high flow intake hose eliminates the highly restrictive plastic inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification.

 

Check your vehicle compatibility: Click here

Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Development and Testing

Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved 16bhp more without any other modifications whilst also demonstrating a consistant 25-30°C temperature drop over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the tempertature drop comparison of the stock and Forge cores in the graph below.

The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C.

All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as its based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.

Product Reviews

Product Reviews

Reviews.io from on Jun 8th 2020 Verified Purchase
Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe.
Professional company I would recommend happily, thanks again.
from on Sep 8th 2019 Verified Purchase
Purchased and fitted this uprated intercooler to my 2014 mk7 golf gti.
I found that dropping the coolant out of the radiator and removing the complete front panel was far easier as you have to slightly grind some plastic off the front panel to get the small clamps to fit (these clamp the radiator to the intercooler) I had previously replaced the radiator and found this a very straight forward process for an experienced mechanic.
Also you have to cut out a couple bits of plastic off the front panel to gain access to the small bolts that clamp the air con radiator to the intercooler.
You also have to remove a plastic trim/runner that’s on the top of the radiator to fit it back into the front panel. And also the two large self tapping screws that are supplied to hold the intercooler onto the front panel are too big.
But aside from a small amount of modifying to the front panel, I can say on first impressions the quality and design is spot on. Visually you can clearly see a significant size increase whilst retaining the factory location and fitment.
The car is yet to be mapped but I have no doubt this intercooler will do its job perfectly!
from on Jul 1st 2018
Simply high quality product.
Ambient temp. Around 10degree. During long acceleration temperature falling.
We think its the best product in Europe.
from on May 31st 2018
One of the best Intercoolers.
Golf mk7 gti with IS38 turbo.
1.8Bar preshure.
When outside Temp +20deegre by C. Intake Air Temperature Beetwen 8-12 degree.
I think its better then other Aftermarket IC.
from on May 29th 2018
Very good IC
Golf mk7 Gti
Is38 turbo + downpipe
Outside Temp 22 degrees IAT 32-34 degrees.
Boost preshure 1.8bar.
When increasing speed and flow rate IAT decreases to 8-9 deegree.
I think its the best product!

Want to leave a review?

Login Register FREE!

Compatible Vehicles

Click the triangles to find your car make and model. Note that the models listed here have either had the part fitted by us or a customer or they are listed as being compatible on industry parts databases. Where it has not been directly fitted by Forge there will then be a separate May Also Fit tab where the make and model will also appear and which details our no-risk approach to purchasing this product, so it is worth checking there as well.

If you need further assistance, please call us on +44 1452 380999 or email us.

Audi
Skoda
Volkswagen

Instructions

Warranty

Warranty Infomation

The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.

This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.

Shipping

Shipping

UK Mainland

Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details

Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary). 

Europe and Worldwide

Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.

Shipping into the EU - Duty Charge Information

All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU. 

If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here


Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.

Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.

FAQ's and other info can be found here.

Expert Answers

Submit Question Cancel
Submitted questions may be published on the website.

Is this fit for VW Scirocco 2014 (CULA) 2.0 TSI 180PS?

Forge Motorsport does not offer an intercooler for the EA888 Scirocco 2.0 models; however, if your model is the earlier EA113 generation we do offer the intercooler with part number FMMK5FMIC.

I need to ask the Uprated Intercooler for the EA888 2.0 TSI engine is coming with Bottom hose for installation or to be installed on the original bart it is in the car system

Hello

This product will fit using the original hoses, however we would recommend our silicone hose kit to be installed as they have a stronger construction for higher boost levels, especially as the OE hoses get older.

Could this fit in a seat Leon cupra 290 LHD?

hello , unfortunately this will not fit.