Please read the following notes carefully to ensure you select the correct actuator for your turbo.
Fiat 500 T-Jet, Fiat Grande Punto T-Jet (including Abarth versions), Abarth T-Jet, and Alfa Mito T-Jet have the IHI turbo fitted as standard. Please select the product code FMACF500 (IHI turbo) in the above drop down menu if you have one of these vehicles.
Fiat 595 145BHP, Fiat 595 Trofeo 160BHP, Fiat 595 Turismo 165BHP, Fiat 595 Competizione 180BHP, and Fiat 695 Rivale 180BHP have either the IHI or Garrett turbo fitted as standard. Please select FMACF500 (IHI turbo) from the option menu if your 595/695 model has the IHI turbo as standard. Select FMACF14 (Garrett) if your model has the Garrett turbo as standard.
Please refer to the images of the stock actuators below if you are unsure. Otherwise please refer to a Fiat Tuner for advice or contact us on 01452380999
IHI turbo stock actuator – mounting bracket fixed to actuator body.
IHI turbo stock actuator (in situ) – mounting bracket fixed to actuator body.
Garrett turbo stock actuator (in-situ) – mounting bracket fixed to turbo housing
Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements.
- Choice of spring pressures to suit your car
- Manufactured from 6026 grade aluminium
- Vehicle specific
- Turbo specific
- Built to order
- Machined and hand polished in the UK
- Choice of piston or diaphragm operation on most actuators
- Nomex reinforced flurosilicone diaphragms
- Laser cut stainless steel brackets (where applicable)
- Tuning and service kits available
- Made in England
- Lifetime warranty*
The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.
When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket
Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals.
Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.
In The Box:
1 x FMACF500/FMACF14 Actuator
1 x Forge Sticker
This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Ordered it from the Netherlands and it arrived 2 days later. Very nice product. Compared to my stock wastegate thuis felt much much better. Installing it was easy and sorted all my car issues immidiately. Ty FORGE for this wonderfull product!!!
The piston type have good performance and more reability , than t3 actuator, however the r in my point of view replacement Diaphragm, is the weak point to all forge actuators, you should improve it with a better compound to support heat and hard use!!!!
Great product .. fast service... easy to fit...
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the Supplier, failure to follow the Supplier’s instructions, or any alteration or repair carried out without the Supplier’s approval.
DELIVERY IS FREE OF CHARGE FOR ALL ORDERS £20 OR OVER
Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man).
Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, Isle of Man, and Cumbria.
Delivery service charge will vary from £15.00 to £26.00. Small sized and low value products are sent by Royal Mail and can take up to 7 working days in transit. All other products are sent by standard UPS/DHL service and can take up to 5 days in transit, but we expect the majority of orders to be delivered within 2 days of dispatch.
Delivery service charges will vary from £10.00 + VAT (20%) to £95.00 + VAT depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process.
Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £10.00 GBP + VAT. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide. This delivery service adjustment will typically be made for low value product below £20.00 GBP + VAT and where the ordered product is small enough to fit in the above-mentioned parcel size.
The Royal Mail recorded service into Europe can take up to 10 working days in transit and tracking number details can be requested via the email@example.com general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by DHL or UPS standard service taking up to 5 working days in transit.
Delivery service charges will vary from £12.00 to £250.00 GBP depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process. Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £12.00 GBP. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide.
This delivery service adjustment will typically be made for low value product below £20.00 GBP and where ordered product is small enough to fit in the above-mentioned parcel size. The Royal Mail recorded service into Europe can take up to 15 working days in transit and tracking number details can be requested via the firstname.lastname@example.org general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search engine found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by DHL/UPS standard service taking up to 5 working days in transit.
Whilst shipping outside of the UK may seem expensive, it ensures safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the email@example.com email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Fiat, Suzuki Swift, Nissan Juke, and Ford Strut Top Covers
Manufacturer: Forge Motorsport