Following on from the success of our billet catch can kit for the Golf Mk5 and Golf Mk6, we are pleased to present another of our kits for the Golf Mk7R and Audi S3.
- Complete kit solution with downloadable step by step instruction guide
- 0.4L capacity*
- Temperature Range: -54°C to +150°C (-65°F to 300°F)
- Emptying made easier with the included drain tap
- A dipstick for simple level inspection.
- Dipstick level set just below 0.4L for optimal breathing
- Compatible with engine cover, so it can stay in place following installation
- High quality, stainless steel hoses with black braiding
- Hoses are resistant to pressure expansion and vacuum collapse
- Hose end fittings used are compatible with the OEM connections
- Inner tube of the hose is constructed from anti-static, smooth, fuel resistant nitrile rubber.
- Hose outer cover is constructed from reinforced stainless-steel wire braid, consisting of partial inner braid & full cover outer braiding.
- You will not need to modify any original equipment which means this kit is fully reversible.
In house testing has proven that our oil catch can assist in helping the engine breathe and perform more efficiently by reducing the carbon build up. We would recommend for any owner to seriously consider this product, not only if they are planning on increasing the power of the vehicle, but also to prolong the efficiency of the vehicle’s engine. Knowing that this is a serviceable part that will need emptying on occasion (time period will vary depending on use) we wanted to make it as user friendly as possible. This thought process is what led to us incorporating both the drain tap and dipstick, after various versions being trialled, we are very pleased with the simple yet effective solution.
Please note, this part will only fit if you have OEM engine mounts. This will not fit those vehicles with uprated engine mounts.
Using the 35+ years of inherent knowledge within the business we worked on how to combine a presentable and tidy aesthetic with functionality and reliability. This resulted in a lines made up of an anti-static, smooth, fuel resistant, nitrile rubber inner tube and a reinforced, stainless steel, black, wire braided outer cover. The outer layer of the stainless steel comprises of a partial inner braid and a fuller outer braid, meaning it will not be effected by vacuum collapse or pressure expansion.
The allowing for the catch can to perform at its best required the braided lines to be near components of the engine that are considerably warm when the car is running. We overcome this by sourcing a heat resistant cover and positioning it to have the greatest possible protection. This not only means the entire kit will function within a clearly defined temperature range -54°C to +150°C (-65°F to +300°F), but it also allows for the engine cover to remain in place after installation, instead of having to remove it permanently.
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Not fitted as yet but the quality is outstanding.
Great piece of kit, has everything that is needed to fit, instructions included. All the parts are well finished and fitted perfectly. The only criticism I have is that the Allen bolt head sizes were Imperial and I only had metric, but was able to get by.
Oil Catch Can Kit For VW Golf MK7 GTI & Audi S3
The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details
Delivery is free of charge for all orders £100 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary).
Europe and Worldwide
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.
Shipping into the EU - Duty Charge Information
All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU.
If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the email@example.com email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
Please i need to buy the reubication . The washer bottle. THANKS REGARDS
Yes we can offer this as a separate product at £70.00 + VAT
Answered 4 months ago