Visit our USA Site
Visit our Asia Site
Description
Product Description
This part replaces OEM part 5WA 145 840D and is for the OEM intercooler or aftermarket intercoolers with 63mm inlets
FMDP1 is Forge's direct replacement kit for the undersized OEM discharge pipe for the 2.0T EVO 4 engine. With the popularity of tuning the new generation EVO 4 engine Forge Motorsport have developed the perfect high flow discharge pipe to further benefit tuning needs. The Forge discharge pipe has an outlet of 63mm to perfectly meet the inlet junction to your OEM or performance intercooler aiding flow and volume by enlarging the restrictive OEM plastic pipe with this excellent solution.
With the quest for more power means more boost and the need to remove any restrictions from the boost system is essential. When we looked at the OEM discharge pipe system it was clear improvements could be made to not only the hard pipe but also to the rubber OEM hoses. Using our 3D scanning equipment and CAD engineers we have delivered a product with the highest level of precision and quality.
With a few different designs Forge Motorsport’s in house development team have spent many months testing and trailing different designs to make sure we offer a superior product to the tuning enthusiast. We have settled with a mandrel bent and shaped alloy hard pipe with the internal diameter increased from 63mm to 70mm from the turbo outlet to the junction where it drops back down to a 63mm and meets the hot side of the intercooler. the newly developed hoses included in the DP1 kit are now constructed from 4 ply fluro lined silicone, the kit is held in position with our specially designed billet bracket to ensure once fitted it is held perfectly in place.
This new setup now equates to a product which can withstand higher boost levels while also flowing more Air efficiently, whilst also being a more durable product than the factory item and not be prone to failure and fatigue like the OEM product. As with all Forge Motorsport products FMDP3 is covered by the legendary Forge Motorsport lifetime warranty.
Performance gains can differ depending on existing modifications and levels of software tuning. typically gains of 3-5BHP and 5-7NM of Torque can be expected when FMDP3 is fitted. The overall look is stealthy, with our textured black powder coat and black silicone hoses which keeps the OEM plus look to the engine bay. FMDP3 is a direct replacement for 5WA 145 840D and like all Forge Products this kit comes with our detailed fitting instructions.
- Audi S3 8Y (2020+)
- Audi TTS 2.0 TFSI 8S 320ps (EA888.4) (2021+)
- Audi SQ2 (facelift EA888.4) (2021+)
- Cupra Leon IV 300 TSI FW (2020+)
- Cupra Ateca 300ps (EA888.4) (2021+)
- Cupra Formentor 310ps (2020+)
- Skoda Superb III 3V 2.0 TSI (facelift EA888.4) (2021+)
- VW Golf 8 R (2020+)
- VW Arteon R 2.0 TSI 320ps (2020+)
- VW T-Roc R 2.0 TSI EA888.4 (2021+)
- VW Tiguan II R 2.0 TSI 320ps (2020+)
Complimentary Products
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Enlarged Discharge Pipe for 2.0 TSI EA888 EVO4 (For 63mm Inlets)
Warranty
Warranty Infomation
The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
Shipping
UK Mainland
Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details
Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary).
Europe and Worldwide
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.
Shipping into the EU - Duty Charge Information
All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU.
If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
FAQ's and other info can be found here.
