THIS WILL ONLY FIT RIGHT HAND DRIVE VEHICLES AT THIS TIME
Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range.
This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives.
The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine.
As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system.
The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response.
With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing.
All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come.
This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport.
Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering.
During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines.The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 (coming soon) certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.
- The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
- This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
- The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
- The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
- Lifetime warranty*
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the Supplier, failure to follow the Supplier’s instructions, or any alteration or repair carried out without the Supplier’s approval.
DELIVERY IS FREE OF CHARGE FOR ALL ORDERS £20 OR OVER
Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man).
Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, Isle of Man, and Cumbria.
Delivery service charge will vary from £15.00 to £26.00. Small sized and low value products are sent by Royal Mail and can take up to 7 working days in transit. All other products are sent by standard UPS/DHL service and can take up to 5 days in transit, but we expect the majority of orders to be delivered within 2 days of dispatch.
Delivery service charges will vary from £10.00 + VAT (20%) to £95.00 + VAT depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process.
Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £10.00 GBP + VAT. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide. This delivery service adjustment will typically be made for low value product below £20.00 GBP + VAT and where the ordered product is small enough to fit in the above-mentioned parcel size.
The Royal Mail recorded service into Europe can take up to 10 working days in transit and tracking number details can be requested via the email@example.com general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by DHL or UPS standard service taking up to 5 working days in transit.
Delivery service charges will vary from £12.00 to £250.00 GBP depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process. Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £12.00 GBP. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide.
This delivery service adjustment will typically be made for low value product below £20.00 GBP and where ordered product is small enough to fit in the above-mentioned parcel size. The Royal Mail recorded service into Europe can take up to 15 working days in transit and tracking number details can be requested via the firstname.lastname@example.org general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search engine found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by DHL/UPS standard service taking up to 5 working days in transit.
Whilst shipping outside of the UK may seem expensive, it ensures safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the email@example.com email address if you require any more information. We reserve the right to change the delivery service and company at any time.