Manufacturer: Forge Motorsport

Piston Actuator for Mitsubishi Evo 10

Product code: FMPACEV10

£204.20Inc VAT
£170.17Exc VAT
(VAT will be added during the checkout process)

Please select product options and quantities below:

Qty:

Product Options:


Product Description

This replacement actuator utilises the latest piston design to irradicate the failures associated with the OEM diaphragm actuators and is supplied complete with bracket ready to install. This actuator was recently put through some independant dyno tests by the guys at Dragsport Magazine for their September 2009 issue. Here is what they had to say: While the Mitsubishi Evo X is an amazing vehicle in stock form, it also responds well to tuning with quality aftermarket components. In stock form, our 2008 Evo X delivered 271.4 wheel horsepower. With the adition of just three parts, we were able to generate an additional 25.5 horsepower and 19.0 lb/ft of torque to the wheels (intake + 5hp, exhaust +10hp, and hard pipe kit +5hp). Recently, we decided to treat the Evo X to a second round of upgrades. First we re-established the baseline power at 289 on a different chassis dyno that tends to be a bit conservative in its figures. Since the Evo X would experience erratic boost delivery throughout the powerband, we selected a Forge Motorsport wastegate actuator.

With the stock actuator, the boost would climb to 19 PSI before falling to 15 PSI at redline. With the Forge unit installed, the engine was able to maintain 20 PSI before falling to only 18 PSI at redline. With the increased boost pressure, peak power jumped to 302 horsepower and 304 lb-ft of torque to the wheels; a gain of 13 horsepower over the previous run. The largest power gain was noted at 6800 rpm with a gain of 47 horsepower over stock. Here are the dyno results for Power and Torque to see for yourselves.

This product is subject to a Patent Application This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket.

Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. After requests for a very durable, fit and forget version of our actuators that would withstand the rigors of marine corrosion or simply would not tarnish, we have now added the option of ordering any of our piston design actuators with stainless steel bodies and external components/fixings. This option does incur a surcharge and will be shown when added to your basket.

 

Please Note: In line with our policy to constantly review ,revise and improve our product range, the product you receive may differ from the one advertised.

Product Reviews

Be the first to review this product

Want to leave a review?

Login Register FREE!

Shipping

UK Mainland

DELIVERY IS FREE OF CHARGE
Small sized and low value product is sent by Royal Mail and can take up to 4 working days in transit. All other products are sent by standard UPS service which is usually a next day service, but can take 2 days in transit.
(Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man).

Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, Isle of Man, and Cumbria.
Delivery service charge will vary from £15.00 to £26.00. Small sized and low value products are sent by Royal Mail and can take up to 7 working days in transit. All other products are sent by standard UPS service and can take up to 5 days in transit, but we expect the majority of orders to be delivered within 2 days of dispatch.

Europe

Delivery service charges will vary from £10.00 + VAT (20%) to £95.00 + VAT depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process.
Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £10.00 GBP + VAT. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide. This delivery service adjustment will typically be made for low value product below £20.00 GBP + VAT and where the ordered product is small enough to fit in the above-mentioned parcel size.
The Royal Mail recorded service into Europe can take up to 10 working days in transit and tracking number details can be requested via the despatch@forgemotorsport.co.uk general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by UPS standard service taking up to 5 working days in transit.
 

Worldwide

Delivery service charges will vary from £12.00 to £250.00 GBP depending on the quantity of product ordered, the related parcel size, and destination postcode. The average charge is approximately £24.00 and the value will be reflected before any charges are incurred during the product selection process. Orders with a value below £20.00 GBP. Where parcel size permits, orders may be sent by Royal Mail recorded service at the fixed rate of £12.00 GBP. This will not be reflected at point of order confirmation and this adjustment will be made by the Forge Motorsport sales administration team provided the parcel size is smaller than 50mm high x 300mm long x 300mm wide.
This delivery service adjustment will typically be made for low value product below £20.00 GBP and where ordered product is small enough to fit in the above-mentioned parcel size. The Royal Mail recorded service into Europe can take up to 15 working days in transit and tracking number details can be requested via the despatch@forgemotorsport.co.uk general enquiry email. The Royal Mail tracking number can be entered into the Royal Mail search engine found in the following tracking service link www.royalmail.com/track-your-item. All other order product will be sent by UPS standard service taking up to 5 working days in transit.

Whilst shipping outside of the UK may seem expensive, it ensures safe and timely delivery of your new Forge Motorsport products. For further information on cost and delivery times, please contact Forge Motorsport using the info@forgemotorsport.co.uk email address if you require any more information.

Warranty Infomation

All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.

For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.

Tags

  • Mitsubishi
    • Evo 10

Associated Products:

Alternative Products